1. Wang J, Zhang J, Lin J*, Ma L (2018) Study on Lubrication Performance of Journal Bearing with Multiple Texture Distributions. Applied Sciences. 8: 244.
2. Zhang J, Lu X, Lin J*, Ma L, Wang J (2017) Dynamic Analysis of a Rotor-Bearing-SFD System with the Bearing Inner Race Defect. Shock and Vibration. 2017.
3. Yue F, Zhang G, Zhang J, Lin J, Jiao K (2017) Numerical simulation of transport characteristics of Li-ion battery in different discharging modes. Applied Thermal Engineering. 126: 70-80.
4. Lu X, Zhang J, Ma L, Lin J*. (2017) Effects of misalignment on the nonlinear dynamics of a two-shaft rotor-bearing-gear coupling system with rub-impact fault. Journal of Vibroengineering. 19: 5960-5977.
5. Fu X, Zhang J, Lin J* (2017) Study on the fatigue life and damage accumulation of a compressor blade based on a modified nonlinear damage model. Fatigue & Fracture of Engineering Materials & Structures. 0.
6. Zhang J, Yang S, Lin J* (2016) A nonlinear continuous damage model based on short‐crack concept under variable amplitude loading. Fatigue & Fracture of Engineering Materials & Structures. 39: 79-94.
7. Zhang J, Wang J, Lin J*, Guo Q, Chen K, Ma L (2016) Multiobjective optimization of injection molding process parameters based on Opt LHD, EBFNN, and MOPSO. Int J Adv Manuf Technol. 85: 2857–2872.
8. Zhang J, Guo P, Lin J*, Wang K (2016) A mathematical model for coupled vibration system of road vehicle and coupling effect analysis. Applied Mathematical Modelling. 40: 1199-1217.
9. Wang J, Zhang J, Lin J*, Li W, Dai H, Hu H (2016) Performance Analysis of a Fiber Reinforced Plastic Oil Cooler Cover Considering the Anisotropic Behavior of the Fiber Reinforced PA66. Polymers. 8: 312-333.
10. MA L, ZHANG J-h, LIN J-w*, WANG J, LU X (2016) Dynamic characteristics analysis of a misaligned rotor-bearing system with squeeze film dampers. Journal of Zhejiang University-SCIENCE A. 17: 614-631.
11. Zhang J, Wang J, Lin J, et al. (2015) Diesel engine noise source identification based on EEMD, coherent power spectrum analysis and improved AHP. Measurement Science and Technology. 26: 095010.
12. Zhang J, Ma W, Lin J, Ma L, Jia X (2015) Fault diagnosis approach for rotating machinery based on dynamic model and computational intelligence. Measurement. 59: 73-87.
13. Xu M, Zhang J-h, Lin J-w, Guo P, He W-j, Li Z-w (2015) Prediction and control of the structure-borne noise of a vehicle based on an optimization technique of the vehicle-body model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 229: 1457-1468.
14. Junhong Z, Shuo Y, Jiewei L (2015) Fatigue crack growth rate of Ti-6Al-4V considering the effects of fracture toughness and crack closure. Chinese Journal of Mechanical Engineering. 28: 409-415.
15. Yu L, Junhong Z, Fengrong B, Jiewei L, Wenpeng M (2014) A fault diagnosis approach for diesel engine valve train based on improved ITD and SDAG-RVM. Measurement Science and Technology. 26: 025003.
16. Zhenpeng ZJZGH, Hai LJL (2013) Analysis of oil consumption in cylinder of diesel engine for optimization of piston rings. Chinese Journal of Mechanical Engineering. 26: 1.
17. Lin J, Zhang J, Yang S, Bi F (2013) Reliability analysis of aero-engine blades considering nonlinear strength degeneration. Chinese Journal of Aeronautics. 26: 631-637.
18. Zhang J, Liu H, Bi F, et al. (2012) Psychoacoustic study on contribution of fan noise to engine noise. Chinese Journal of Mechanical Engineering. 25: 809-815.
19. Lin J, Zhang J, Zhang G, Ni G, Bi F (2012) Aero-engine blade fatigue analysis based on nonlinear continuum damage model using neural networks. Chinese Journal of Mechanical Engineering. 25: 338-345. |
